首页 >> 科研成果 >> 论文专利

论文专利

一、学术论文

1、中文期刊

[1]循环流化床超低NOxSO2排放技术研究进展.洁净煤技术.2020

[2]燃料流态化预热后NOx生成路径及详细机理研究.洁净煤技术.2020

[3]煤粉流态化预热气态组分CO/CO2生成转化特性研究. 2020

[4]工业领域煤炭清洁高效燃烧利用技术现状与发展建议.中国科学院刊. 2019

[5]循环流化床煤富氧-水蒸气气化实验研究.燃烧科学与技术. 2019

[6]循环流化床锅炉炉内低NOx排放技术研究及应用.中国基础科学. 2018

[7]六回路环形炉膛循环流化床悬吊屏结构布置对气固流动影响的试验研究.工程热物理学报. 2018

[8]基于循环流化床预热的半焦燃烧试验研究.工程热物理学报. 2018

[9]新型660MW超超临界环形炉膛循环流化床锅炉技术研究.中国电机工程学报. 2018

[10]240t/d固体热载体粉煤热解工艺及中试研究.洁净煤技术. 2018

[11]六回路环形炉膛循环流化床结构布置实验研究.中国电机工程学报. 2018

[12]神华煤及混煤的循环流化床工业气化炉运行研究.中国电机工程学报. 2017

[13]细粉半焦预热燃烧过程中颗粒特性与氮元素释放关系实验研究.中国电机工程学报. 2017

[14]循环流化床工业气化炉高钠煤配煤气化.煤炭学报. 2017

[15]准东煤循环流化床气化过程中的矿物质转化行为特性.燃烧科学与技术. 2017

[16]准东高钠煤循环流化床煤气化特性.燃烧科学与技术. 2016

[17]刚玉床料对高钠煤循环流化床气化中钠迁移转化的影响.工程热物理学报. 2016

[18]细粉半焦预热燃烧过程中氮的迁移特性实验研究.中国电机工程学报. 2016

[19]准东高钠煤气化过程中Na的迁移转化规律.煤炭学报. 2016

[20]不同预处理方法对准东高碱煤中碱金属含量测定的影响.燃料化学学报. 2016

[21]加压循环流化床气固流动特性冷态试验.中国粉体技术. 2017

[22]煤焦燃烧含氮硫气体生成的TG-MS定量分析.煤炭转化. 2016

[23]循环流化床燃用半焦SNCR脱硝特性试验研究.煤炭学报. 2015

[24]半焦燃烧及煤热解燃烧耦合试验研究.煤炭学报. 2014

[25]四旋风分离器单侧并联布置循环流化床冷态试验.电站系统工程. 2014

[26]窜气对旋风分离器性能影响的实验研究和数值模拟.锅炉技术. 2010

[27]600MW超临界CFB锅炉旋风分离器布置的数值模拟.工程热物理学报. 2009

[28]旋风分离器的入口烟道布置对性能的影响.中国电机工程学报. 2009

 

2、英文期刊

[1] Experimental Study on ultra-low NOx emissions from pulverized coal preheating combustion, Asia-pacific Journal of Chemical Engineering,2020

[2] Experimental Study on Combustion Characteristics of Pulverized Coal Based on Partial Gasification of Circulating Fluidized Bed, Energy Fuels,2020

[3] Investigation on the heat transfer coefficient and uniformity in a polygonal furnace of a 350 MW supercritical CFB boiler, Applied Thermal Engineering,2020

[4]Innovative NOx reduction from cement kiln and pilot-scale experimental verification, Fuel Processing Technology,2020

[5] Research on the dynamic process of NO heterogeneous and homogeneous reduction, Journal of the Energy Institute,2020

[6] Coke generation and conversion behavior of pulverized coal combustion, Journal of the Energy Institute,2020

[7] Investigation on the operating characteristics of a 350 MW supercritical, Applied Thermal Engineering,2019

[8] Experimental study on NO emissions from pulverized char under MILD combustion in an O2/CO2 atmosphere preheated by a circulating fluidized bed.,Fuel Processing Technology,2018

[9] Effect of air distribution on NOx emissions of pulverized coal and char combustion preheated by a circulating fluidized bed, Energy & Fuels,2018

[10] Hydrodynamics in a circulating fluidized bed with annular furnace and six parallel cyclones, Journal of Thermal Science,2017

[11] Combustion and NOx emission characteristics of Shenmu Char in a Circulating Fluidized Bed with Post Combustion, Energy&Fuels,2016

[12] Experimental investigation of gasification and incineration, fuel,2015

[13] The effect of limestone on SO2 and NOx emissions of pulverized cold combustion preheated by circulating fluidized bed,fuel,2014

[14] Gaseous Emission of Monocombustion of Sewage Sludge in a Circulating Fluidized Bed, Industrial & Engineering Chemistry Research,2013

二、专利

[1]带多分离器的环形炉膛循环流化床锅炉,发明,2018,专利号:ZL201510217373.9

[2]变截面循环流化床气化装置及气化方法,发明,2017,专利号201710647562.9

[3]带细粉灰熔融的循环流化床煤气化方法及其装置,发明,2015,专利号:201510641319.7

[4]旋风分离器及预热气化系统,发明,2018,专利号:201810364252.0

[5]冷却式喷嘴以及反应器,发明,2018,专利号:201811494348.5

[6]预热式气化装置和预热式气化方法,发明,2019,专利号:201910096729.6

[7]具有多个旋风分离器的大型循环流化床锅炉,发明,2015,专利号:ZL201110210467.5

[8]COMBTEETHTYPEWATER-COOLEDCOLUMNANDHEARTHHAVINGSAME,发明,2016,专利号:US15104959

[9]梳齿形水冷柱及具有该水冷柱的炉膛,发明,2017,专利号:ZL201310712004.8

[10]带多分离器的八边形炉膛循环流化床锅炉,发明,2019,专利号:ZL201510219894.8